Laminate – Edge and corner designs
 |
Single cove Has a square front edge that is 1 ¼” thick. Top of splash is also square. Back splash height is 3 5/8” from the top of the deck. |
 |
Unique edge Top is 1 ¼” thick with a laminate beveled front edge. Any color laminate can be inlaid in the bevel. The back splash can be post-form or self-edge. In either case, the top of the splash is also beveled. Beveled end caps are also available. |
 |
Post-form with waterfall edge Has a 1 ½” front with a radius. Back splash height is 3 5/8” from the top of the deck. |
 |
Self-edge Has a square front edge that is 1 ½” thick. Back splash is also square and is screwed on from the bottom of the deck. Back splash is 4” high from the top of the deck. |
 |
Touch of oak (Also available in cherry, hickory, maple, and ash and elder.) Has a 1 ¼” solid wood front edge with an OGEE rout. (Also available with a bevel rout.) The wood is unfinished. Back splash is post-form type and is 3 5/8” from the top of the deck. Self-edge back splash is also available. |
 |
Post-form with no-drip edge Has a 1 1/8” raised front edge on a 1 ¼” deck. Back splash height is 3 5/8” from the top of the deck. |
 |
Contemporary edge Has 180° full radius front edge that is 1 ¾” thick. Back splash is post-form, and is 3 5/8” high from the top of the deck. |
 |
Classical Has ½” top and bottom radius separated by a flat face. The front edge is 1 ½” thick. Back splash is post-form and 3 5/8” high from the top of the deck. |
 |
Barcelona Standard substrate is 3/4” industrial grade particleboard, available in 8’, 10’ and 12’ lengths. |
 |
Valencia Standard substrate is 3/4” industrial grade particleboard, available in 8’, 10’ and 12’ lengths. |
